| Author |
Message |
Victorio Pellicano
| | Posted on Tuesday, July 2, 2002 - 8:47 am: | |
This might sound kind of like an elementary problem to most, but I can't figure it out for the life of me. On the side of the K7SEM MB (behind the bios and in adjacent to the IDE slots) there are the pins for the Power Switch, HD LED lights, Reset Switch, Green LED, and the speaker (as the board is labeled). I am going to try and draw an ASCII representation of the pins
[::]
[::]
[::]
[::]
[::]
I know my drawing is kind of crude, but please bare with me. This is how the pins are labled.
[::] Power SW
[::] SM
[::] RST
[::] HDD LED
[::] Speaker
I tried plugging in the cables horizontally (..), but that doesn't seem to work. Any help (especially a graphically enhanced website or something) would be greatly appreciated. |
win
| | Posted on Wednesday, July 3, 2002 - 8:40 am: | |
ftp://210.17.18.13/manual/k7sem.zip
this is the zipped manual for this board. on page 17 of the manual, it has the picture of the panel and the proper way to connect it up and which pin is #1 so you have a reference. you need adobe acrobat reader to view the manual once it's unzipped. have fun! |
|
