Main Site Nav
Topics Topics Edit Profile Profile Help/Instructions Help    
Search Last 1|3|7 Days Search Search Tree View Tree View  

Configure Geforce4TI4200_K7SEM mother...

Trish's Escape from Hardware Hell Help Board » Setup and Configuration » Drivers, Jumper Settings & Manuals » Configure Geforce4TI4200_K7SEM motherboard « Previous Next »

Author Message
Tony Sarawan
Posted on Tuesday, February 4, 2003 - 3:05 am:   

hardware: AMD ATHLON 1.1 CPU
k7sem motherboard
to set/configure Geforce4TI4200 64MB DDR or reset motherboard to original onboard graphics AS WE HAVE FAILED EVERYWHICHWAY to add the geforce4 - Can you please HELP EITHER WAY- TO SET THE GF4 -(WHEN WE PLUG IN THE MONITOR ON THE GF4 card IT IS BLANK but works on a low color/resolution on the motherboard plug.We took it out and now the onboard graphics is down to 2-16colors -resolution 480 x680.(is the motherboard
incompatible -it uses sdram 128MB G4 HAS 64MB DDR
Please help guys -thanks email
or post here please.
Posted on Tuesday, February 4, 2003 - 9:51 pm:   

Power to the AGP Slot is an issue with Geforce4 cards and the K7sem. Only a few brands will work out of the box. You may be able to find a bios update at ECS to compensate for the compatability.
Posted on Tuesday, February 4, 2003 - 9:53 pm:   

If no updates are available to fix the Geforce4 problem, try reloading the video drivers for the onboard video.
Tony Sarawan
Posted on Thursday, February 6, 2003 - 2:52 am:   

E.S. -thanks for the tip will let you know the
outcome later.

Does anyone have a motherboard that has no problems with the GF4TI4200 and AMD 1.1 CPU or any other CPU -PENTIUM OR AMD? -PLEASE let me KNOW.
Tony Sarawan
Posted on Thursday, February 6, 2003 - 9:11 pm:   

Thanks E.S - I've got it back to square 1 (with the onboard graphics working AT 32 BIT.
Still to try again with the gf4ti4200 as you suggested PERHAPS OVER THE WEEKEND.

Add Your Message Here
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Options: Enable HTML code in message
Automatically activate URLs in message

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page