Author |
Message |
Tobias
| Posted on Sunday, January 27, 2002 - 6:32 am: | |
Hi! Since I installed my new asus a7v133 board, i cant establish any printer-connection. i've tried to do so with several printers (HP, Lexmark Z32 and(!) Z33). Neither on parallel nor on usb ports i managed to get it work. i think it's not an OS or software problem, because i am using win98 and unix on the same machine - with both i failed. Even a bios update doesnt match the problem. need to escape from this hell, any ideas? kind regards tobias |
Rob (Robwalk)
| Posted on Sunday, January 27, 2002 - 11:02 pm: | |
Hi Tobias, The only thing I can think of that would cause neither usb or parallel ports to work, and particularly that you have tried different printers is the cable and/or perhaps the usb is either not enabled or has a conflict. Check device manager and see if there is a conflict and check the bios to make sure the usb and parallel ports are enabled. Good luck, Rob |
|