| Author |
Message |
rdg18
| | Posted on Thursday, May 2, 2002 - 11:28 am: | |
I have an IBM computer with sure path bios.I can't find any info on Sure Path, any help would be appreciated. I put a new harddrive in and it won't even find it. The bios tells me that there is no harddrive installed and it gives me a configuration change message (configuration change 1762 and 162).Cables and power are hooked up right. |
Kevin
| | Posted on Friday, May 3, 2002 - 3:17 am: | |
Are the drives switched properly.
The bootable hard drive should be on ide 1 and set as master.
The second hard drive I would recomend being on ide 2 and set as master.
The first cdrom I would recomend it be on ide 1 set to slave.
Here is a quote from another forum "I think the "1762" error relates to the drive or CD ROM, while the "162" error is just a general error code to indicate a config change."
Also maybe try another cable. |
V (Vera)
| | Posted on Friday, May 3, 2002 - 5:55 pm: | |
Have not worked with surepath. Do you get the option to enter heads/cylinders/sectors/ etc.??
Is the main drive the only drive on the cable? If not, try removing the slave.
Try setting the drive to be single.
a few suggestions |
Leszek
| | Posted on Saturday, July 12, 2003 - 12:00 pm: | |
I have an IBM 7585P02 industrial computer with SurePath BIOS. I want to install a 30G byte hard disk on it, but it allows to access only 8G bytes, even with running EZ-BIOS. Any clue how can I overcome that limit or upgrade SurePath BIOS? |
|
