| Author |
Message |
Peter
| | Posted on Saturday, January 4, 2003 - 2:56 am: | |
This modem is made by GVC (SF-1156HV+/R19) or by KTX (56KVSE).
It is a 56k internal, ISA
What I need is the jumper settings or manual on this particular modem. |
Cecil
| | Posted on Saturday, January 4, 2003 - 10:53 am: | |
Try the link below. Click on SUPPORT & SERVICES \ DRIVERS & MANUALS
http://www.gvc.ca/ |
Peter.
| | Posted on Monday, January 6, 2003 - 4:02 am: | |
Have tried the link but no luck and also awaiting answer from their tech support, that is if they do answer.
Thanks any how for your message. |
Cecil
| | Posted on Monday, January 6, 2003 - 10:49 am: | |
Went to the link suggested with no problem. Both the manual and driver was listed. You need to download the modem driver file and read the readme.1st file. |
Peter
| | Posted on Sunday, January 12, 2003 - 3:48 am: | |
The manual has no jumper settings.
Will have to look else where. |
E.S.
| | Posted on Sunday, January 12, 2003 - 12:02 pm: | |
Peter, I have the /R21 version of this modem and the jumper settings are included in the manual, your /R19 model should be fairly close as far as jumper settings are concerned as they both use the Rockwell:Conexant chipset. The main concerns with these modems are setting up ports while the existing comports are still enabled on the mainboard I.E. serial Port 1&2 in bios. If you need help in this area post back here and I can walk you through it. |
Peter
| | Posted on Saturday, January 18, 2003 - 3:04 am: | |
Could you please send an email attachment with the jumper settings as I should be able to work them out.
Email address is supplied with this message.
Regards Peter. |
E.S.
| | Posted on Saturday, January 18, 2003 - 10:14 pm: | |
Hi Pete, Tried to email you but the mail was sent back as undeliverable. Check you email address. |
E.S.
| | Posted on Saturday, January 18, 2003 - 10:15 pm: | |
Hi Peter, tried to email the PDF to you but the mail was sent back as undeliverable. Check your email address. |
Peter.
| | Posted on Thursday, January 23, 2003 - 2:58 am: | |
The correct e-mail address is with this message.
Regards Peter. |
