Author |
Message |
Arlene
| Posted on Friday, January 31, 2003 - 3:44 am: | |
I tried the Dell Website but got absolutely nowhere. I'd like to have a faster system but I don't know where to start, or even if it can be done, or where to get compatible parts. I sincerely appreciate this site, I've always gotten answers to my questions that were worth reading. I would recommended you to anybody. As Always, Arlene |
arlene heavner0
| Posted on Friday, January 31, 2003 - 3:46 am: | |
Sorry about the typo, there is no z in the model number. As Always, Arlene |
E.S.
| Posted on Friday, January 31, 2003 - 9:03 am: | |
http://support.ap.dell.com/docs/dta/XPSPCMT/00000006.htm I hope this helps you out. It does look like a possible upgrade to 166MHZ CPU on some of these models. You will have to check if the jumper layout is the same on your particular mainboard. |
Arlene
| Posted on Saturday, February 1, 2003 - 3:34 am: | |
Hi E.S. I went to the URL you sent and the settings look completely different from the Front Panel and Jumper Details on the specs I downloaded for my model System Board 221564-F01. There are 123 sequences(4)labeled A-B-C-D. Check it out at http://www.ari-service.com/blender/data/29709/CindyMLB1.gif Does that look like I already have the 166MHZ? Sincerely, As Always, Arlene |
Arlene
| Posted on Saturday, February 1, 2003 - 3:41 am: | |
Hi E.S. Sorry about the mix-up, I had another question out there about my other computer that I'm having trouble getting a patch to correct Windows 95 and the IDE controller issue and I downloaded all the information on that computer because I had no handbook at the time. The URL I sent you is for the AST, Advantage 9306. Again I apologize. As Always, Arlene |
Arlene
| Posted on Saturday, February 1, 2003 - 3:44 am: | |
It's me again, Since I don't have the handbook for the Dell either, I'll book mark the URL you gave me and see if I can download the specs to check them out. I've been up all night, can you tell? As Always, Arlene |
E.S.
| Posted on Saturday, February 1, 2003 - 8:51 pm: | |
Hi Arlene, Wondered why you would post a URL for an AST when your original post was about a Dell, glad you cleared it up. LOL. |
Arlene
| Posted on Thursday, February 6, 2003 - 5:48 pm: | |
Hi E.S., Thanks for not thinking I'm a nut case. The URL was a big help and I got all the info I needed. Thanks again, As Always, Arlene |
|