Author |
Message |
Mick Baseley
| Posted on Friday, June 6, 2003 - 6:31 am: | |
I Have a Gigabyte GA-7ZXR M/B with dual bios.I flahed the bios with the wrong code. The system now hangs at the checking NVRAM.the board doesn't have a clear CMOS jumper pin. I've tried disconnecting the power lead and removing the battery and left it over night, But still have the same problem.any other suggestions would be much appreciated. Thanks |
Tom
| Posted on Wednesday, June 18, 2003 - 12:03 am: | |
Hi Mick, The only way out of the problem is to buy a new bios chip for your motherborad, or take the chip out and put another one in from another computer of the same make. start up the pc then take the chip out ( do not swith off your pc and be careful )and put yours back in and reprogram your chip.Depending on where your from bios chips can be hard to find. There are plenty of web site available do. They cost about $5. |
|