|Posted on Saturday, January 3, 2004 - 9:57 pm: |
Installed K7S5A Motherboard with Athalon CPU, system starts up but stops at F1 Enter Setup, F2 Load Optimal Setup. Keyboard seems dead. Swapped with good keyboard, same response. Removed ATX power connection, reset JP1 (To Clear CMOS) reconnected power, same result. What gives?
|Posted on Saturday, January 3, 2004 - 10:49 pm: |
Try setting up the system outside of the case to see if it starts properly If it doesn't I would suspect the power supply if it does start up than you may have a problem with the motherboard/case mounting.