|Posted on Friday, January 5, 2001 - 8:11 pm: |
I can not run at 800X600 resolution. The right hand side of the page I am viewing is cut off. No adjustments on the
monitor controls help and I tried another monitor and had the same problem. I installed updated drivers for the
Savage4 video card but the problem still persists. I can use higher resolutions though, anyone have a clue?
|Posted on Friday, January 5, 2001 - 9:12 pm: |
Is it a TV out card? Sometimes turning off this feature can make a difference.
Aside from that, Im clueless expect for interferance from other devices near the cable, or a bad cable.
|Posted on Saturday, January 6, 2001 - 2:23 am: |
Try playing with higher refresh rates. The higher the refresh rate, the smaller the viewable image will become at a given monitor setting. 70 Hz is the lowest "flicker free" setting for most people, but most modern (1997 or newer) monitors will support 85 Hz or higher at 800x600
|Posted on Sunday, January 21, 2001 - 5:20 am: |
I have the same problem with my viper330, at first my computer couldn't do 1024*768, now I can't use any resolution but 640*480 what could I do against this??
|Posted on Sunday, January 21, 2001 - 5:54 pm: |
Make sure that you have your monitor driver installed. If you can't find a driver for it, just change it to svga 1024x768 @ 75 Hz.
I have a viper 330 AGP that just went black on me the other day. Luckily they have a five year warranty. Keep the reciept!!!