Main Site Nav
Topics Topics Edit Profile Profile Help/Instructions Help    
Search Last 1|3|7 Days Search Search Tree View Tree View  

I THINK MY BIOS WAS DELETED FROM THE ...

Trish's Escape from Hardware Hell Help Board » The Archive » I THINK MY BIOS WAS DELETED FROM THE MOTHERBOARD!!!!! HELP A.S.A.P., PLEASE!!!!!!!!!!!! « Previous Next »

Author Message
Andy Flesner
Posted on Sunday, September 26, 1999 - 3:24 pm:   

I was told by a tech that my computer wasn't fried(i thought it was), and that the BIOS might have just been deleted. I have an HP Brio. The hard drive and the fan respond. But the floppy doesn't! i thought i could just try a system disk, but it doesn't help without a floppy reading the disk. There was a problem when i plugged in the computer, it would come on without pressing the switch and it would stay on. I changed the CMOS jumper and it wouldn't come on until you pressed the switch, but it would still stay on. Is there anybody out there that can help me? My e-mail address is airwolf123@hotmail.com, my ICQ # is 26831043, and my AOL IM screenname is Airwolf647. Somebody please help me! Thank you!
dirtier
Posted on Sunday, September 26, 1999 - 3:24 pm:   

first of all, you failed to mention if you could boot up off your hard drive let alone your floppy. have you tried using another floppy cable in place of your original cable? do you hear any beep(s) when you power on you machine. if you don't hear any beeps then your mobo is probably dead.
jbarnes
Posted on Wednesday, March 15, 2000 - 1:03 pm:   

I lost my BIOS on an ASUSTEK board, had to use another computer with a similar board and hot flashed the bios, Where you boot to dos on the new computer , pull the bios chip, put in the bad one, and flash it with their utility.

Add Your Message Here
Post:
Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page