| Author |
Message |
John
Posted From: 12.215.49.191
| | Posted on Monday, June 5, 2006 - 4:03 pm: | |
I have an old ibm 300GL that I'm upgrading for a friend. It's the old socket 1 type p2 400. I have a p3 600 to install. I need jumper settings and a bios upgrade that will run the new processor. Any suggestions? Thanks |
Moderator (Es)
Username: Es
Registered: 6-2003
| | Posted on Monday, June 5, 2006 - 6:55 pm: | |
if its a model MT6563 or newer just install the cpu, since the multiplier is locked on all P3 cpu's, the jumpers don't do much and the voltage change between a 400 P2 and a 600 P3 is handled by the VRM. |
|
